CNC Control Computer

By: Ivan Irons

The Control Computer generally resides in the shop somewhere near the CNC machine it is controlling. Control Computers don’t have to be the top of the line, every bell and whistle type of computer. These are the workhorses. Save your money for a good design computer. You will save much more time having a fast computer for your designing.

A control computer doesn’t have to be that powerful for a few good reasons. It doesn’t have the workload. It takes G-Code and turns it into signals that it transmits to the Machine Controller. Turning G-Code into signals is not that labor intensive for a computer.

I have used multiple types of control computers. Everything from a 486 DOS running “$30 special” to a modern Dell with Windows XP. I have yet to try one with Vista. I will keep you posted. Generally I like to find a good used computer for a couple hundred bucks, wipe the hard drive and only load the control software onto the machine. That way you know what you have.

There is another good reason you don’t want to spend a lot of money here. This computer will usually be located in the shop. Dirt will be located in your shop. Using logic here, dirt will be located in your computer. If the computer does go belly up, you aren’t out your children’s college tuition.

Here is my strategy in a nutshell for Control Computers. The dirtier the job, the less money I spend on the computer. My plasma cutting computers are bought in the $40 range. They eat a lot of dust and dirt. I blow them out frequently. My wood routing computers are in the $100 dollar range. My milling machine computers usually are in the $200 range. Truth be told, they all last a very long time if you keep dirt, dust and plasma smoke out of them.

How is the CNC Control Computer used?

The control computer has the control software loaded on it. You start up the control software then load up the CNC Program you created. When you do this, the G-Code will be visible and ready to go. Once you prep your CNC Machine and zero it out, you can begin your “cycle.” A cycle is usually completing one CNC Program, which is a machining sequence. You will also hear the term “Cycle Time” on the professional side of CNC a lot more. The quicker you can get the cycle time, the more parts you can make. And yes, that translates to more money.

Back in the good old days of Home CNC, everything was transferred on a disk. Now I have seen people include their Control Computers on their home computer network and transfer the files needed wirelessly. At a very minimum, get a good jump drive and transfer things back and forth that way.

CNC has become a very popular hobby and more and more people are starting to hop on the band wagon of CNC. Its a fun hobby and easy to do from your very own home with just a little elbow grease and creative mind.

Article Source: http://www.bigfreearticles.com

The Control Computer generally resides in the shop somewhere near the CNC machine it is controlling Control Computers don’t have to be the top of the line, every bell and whistle type of computer

About the Author:
Ivan is active in CNC and CNC Programming. CNC Machine is part of his expertise.

Tags: computers and technology, cnc, cnc machine, cnc programming

Please Rate this Article

Comments

Share This Article - Quick and Easy Using This Button:

Add to Onlywire

Click the XML Icon Above to Receive Computers and Technology Articles Via RSS!

Read More Articles From - Home | Computers and technology

The World’s Best Binoculars, A Personal Choice By: Terry Ross - The question is which of the market leaders in the field of optics can lay claim to having produced the world’s best binoculars?
Tags: computers and technology, world's best binoculars, the world's best binoculars, best binoculars
Antivirus Update - Why Should You Update Your Antivirus Software? By: Anu Kool - You took your time to research which among the existing antivirus software around best suit your computer and your usage. You took time to ask technologically savvy friends and relatives and you even visited some well known tech-related forums to get unbiased information about antivirus.
Tags: antivirus update
Best Antivirus – What is the Best AntiVirus Software to Protect Your PC? By: Anu Kool - We can call our computers our versatile best friends. In this modern world, everyone needs a computer. We can do a lot of things with our computers. We can prepare documents, make, edit and watch videos, listen to music, surf the Internet, send E-mails, chat with our friends, play games, or even make calls!
Tags: computers and technology, best antivirus
Prevent Unnecessary Hardware Upgrades By: C Toumayan - There’s nothing like having to replace something before it’s time. When a car, for example, starts breaking down four years after purchase, the owner unexpectedly has to pull together the financing for another vehicle and go through the painful lease or purchase process.
Tags: computers and technology, defrag, defragmentation, hardware
Prepaid Cell Phones – Five Reasons to Dump Your Contract and Go Prepaid By: Tim Whiston - Prepaid cell phone service is better than standard contract service in many ways. This article covers the top five reasons to dump your contract and go prepaid now. Reason One: Control With prepaid you only pay for minutes you actually use. Surveys indicate 70-80% of all postpaid minutes go unused.
Tags: computers and technology, prepaid cell phones, prepaid cell phone service, prepaid wireless
Camcorders: A Guide to Beginners By: Roberto Sedycias - Camcorder, as the name suggests is a device that combines both a video camera and a video recorder in a single unit. As compared to its previous technology that used separate devices for recording audio and video, a camcorder has a built-in recorder unit for recording both audio and video.
Tags: computers and technology, camcorder
Make Your Digital Camera Batteries Last Longer By: Roberto Sedycias - Digital cameras, also known as filmless cameras are one of the most intelligent inventions of late. Because before digital cameras, even the most high end cameras were chemical process dependent for photo printout. But in digital camera, images are recorded electronically by an inbuilt computer.
Tags: computers and technology, digital camera
Equip Yourself With the Finest Photography Equipment By: Martin Milewski - As a hobby photography has universal appeal and most people almost always have indulged in it. Occasions are not complete without photographs being taken to capture the essence of the event and make it more memorable. Pictures provide a record of what happened, when it happened and sometimes how it happened.
Tags: computers and technology, photography equipment
Longer Life For Your Cell Phone Battery By: Roberto Sedycias - Cell phone has become one of the basic essentials among the techno-savvies irrespective of their profession and life style. Most people are using cell phone in place of a landline connection primarily due to their portability. However, the handy device needs proper care and attention for consistency with its performance.
Tags: computers and technology, cell phone, cellular
Why We Should Support the Indie Game Development Scene By: Alan Skorkin - Indie (independent) game developers have been getting more and more attention lately and without doubt the attention is well deserved. The computer gaming industry would be well served if all of us showed a bit more support for the indie game development scene. And here is why.
Tags: computers and technology, games, indie, gaming, opinion