EDM Machining and How To Prevent Pitting

By: Randy Hough

Anyone connected to EDM machining is all too familiar with the scene. The scenario goes something like this:

You spend hours designing an injection mold core or cavity, days CNC milling and grinding to get the size and shape required. The only thing remaining is the EDM machining of the details. You have the graphite electrodes made up,which takes a couple more days, and finally everything is set up in your CNC EDM machine.

Typically, you might make 4 cavities, which will produce 4 exactly identical plastics parts when everything is finally finished. Thing are going well, you have run the first 6 different shaped electrodes through the process, now there is just one more. Only another 16 hours and you will be done and onto the next project.

So, you get it all set up to run all night, and you feel confident that everything is as it should be, you can sleep peacefully without waking up in a start, wondering if you did this or that before going home.

The next morning

You check on you job the next morning and inspect it while still in the machine, it all checks out, so you remove it, clean it up and give it to the mold polisher to make it all shiny and nice. Soon, he comes in and tells you he needs to show you something. Oh oh...

Sure enough, right at the bottom of the deepest part, a rib that is there to make the plastic part stronger, is a pit. Another name for this pit is a DC arc, or zit, or some expletive that is unprintable. What this means is that there is a small hole, or crater at the most inaccessible region of your mold that looks like it was bombed when you view it through a microscope.

Now you need to get creative and fix it, if you can. Usually there is some convoluted way to fix it by cutting out the bad part and making an insert to replace the pitted area. Sometimes though, it is just not possible to repair it and the entire piece must be scrapped!

How to prevent DC arcing

DC arcs are primarily caused by one thing: bad flushing. Even with central flushing or lateral flushing, there can be dead spots where EDM sludge builds up; the bottom of ribs are a favorite hiding spot.

The sludge acts like part of the electrode and attracts sparks that arc across the dielectric fluid and faithfully reproduce their shape in the steel. If this continues for a length of time, you get a pit. The longer it persists, the bigger the pit.

Dirty oil is also a common culprit to DC arcing. This happens because the filters are full, or not fine enough to filter out the EDM sludge and grit. It should be able to filter down to a 1 micron size in order to ensure no pitting due to dirty oil.

Some manufacturers claim that their machines have software that prevents DC arcing, and to a great extent they do. Mostly this is by retracting the electrode out of the cut so flushing can occur. Some have a high speed oscillating effect that improves the flushing as well. Then there are some that have improved cutting parameters that will adapt when the machine senses a DC arc.

All of these methods really get down to improving flushing. Even high tech, new EDM machines will pit. I know because I have had to polish many surfaces EDM'd by these machines! You will find a nice looking surface that is not so easy to detect until you begin removing the first layer of recast.

Then you will find many, pits, not big enough to scrap the part, but certainly big enough to make the polishers job much more difficult and possibly changing the dimensional integrity of the steel.

Make more money and save time

It might seem like a waste of time to make sure you have adequate flushing, but in the long run, it will save you time and money. Even with the high end, new EDM machines, you should keep this in mind. Whether you deal with it through the circuitry or mechanics of the orbiting or the filter, make sure you take care of the flushing

Electrical discharge machining is an amazing machine tool with tremendous importance for manufacturing. It is possibly the least known and most used machine for producing the endless variety of plastic products we use and appreciate everyday. Just look around you!

Article Source: http://www.bigfreearticles.com

Not many things are more frustrating than pitting in EDM machining. All that hard work, and then bam! Find out what causes DC arcing and how to prevent it.

About the Author:
Randy Hough lives and works in the Upper Valley of Vermont. He has been a master plastic injection mold maker for 30 years, a youth pastor for many years and has traveled and studied extensively in Europe. He also has 8 lively children who have taught him more than anything else. He has a site about dealing with family stress and a plastic injection mold making site.

Tags: business, edm machining, electrical discharge machining, pitting in edm machining, dc arcing, dc arcs

Please Rate this Article

Comments

Share This Article - Quick and Easy Using This Button:

Add to Onlywire

Click the XML Icon Above to Receive Business Articles Via RSS!

Read More Articles From - Home | Business

How to Manage Wholesale Video Games Businesses Online By: Joaquin Reveron - To manage or not to manage a wholesale video games businesses? If you do not manage them yourself, you might as well consider having them managed by efficient and trusted personnel. By efficient and trusted we do not necessarily mean, immediately family, friends or the related. It means people that you can vouch for completing the tasks at hand successfully without further ado. Among the many ways to manage successful businesses, most importantly the ones you are starting and keeping from the comfort of your own home or nearby productive office it is necessary to set daily schedules.
Tags: business, wholesale games, wholesale video games
Getting Reliable Wholesale List Contacts: Answers! By: Joaquin Reveron - Finding a reliable wholesale list for games on the internet can be a challenge. Can be a challenge for two particular reasons, you have too many $0.99 opportunities in auction sites and you have free opportunities that you might want to test in exchange of your time. There is absolutely nothing wrong with such actions steps. In fact, it is a normal step to highly consider if you have all the time in the world to find legit sources and test many of them.
Tags: business, wholesale list, wholesale games
How to handle the top 10 SME Sales Objections - Part I By: Peter Lawless - A Sale is considered closed when the buyer and seller reach agreement on terms for the buyer to take ownership of a product or service. To get to this stage, the seller normally has to “close” the sale, by asking the buyer for their business. This is where the buyer raises “objections”. Objections generally fall into three main types. This article will explore the types of objection, how they arise and how to overcome and avoid them. Part II will then discuss the 10 most common objections, and how to handle them to close the sale.
Tags: business, marketing, marketing strategy, sales, increase sales, sales training, marketing plan
How Bookies Triple Their Profits - How to Make Money in the Gambling and Sports Betting Industry By: Chris Bailey - A Price Per Head shop is a bookies’ best friend: is what allows bookies today to outsource their sports betting business without dealing with the hassles of running their own sportsbook. No overhead, no complications. How does this work? It is a fairly new concept: only a few reputable companies are out there and these establishments have made sure to introduce a new way for bookmakers to squeeze the juice out of taking bets during NFL season and becoming a successful sports bookmaker.
Tags: business, price per head shop, bookie, sports betting business, offshore bookmaking agent, sportsbook office o
Best Practices For Transporting Trade Show Displays By: Amy Nutt - Transporting your tradeshow display doesn’t involve rocket science, but it isn’t something you want to skimp on either. It does take a bit of planning and coordination. Why do you need to be so careful? That is because you want to make sure all components of your trade show display needs to arrive at the event on time. This literally means that the shipping and delivery of trade show displays has to be choreographed like it is a ballet. The major exhibitors will hire companies who specialize in trade show display transport.
Tags: business, display booth rental, trade show display rental
Different Ways of Customizing Trade Show Displays By: Amy Nutt - Your trade show display is going to make you or break you. It is that one thing that customers seem to see once. If your display looks good, then the customer will move onto what type of products you’re selling. Because of the fact your trade show display is your main "eye-catching" piece, You need to be creative with it. You need to make sure that it doesn’t look like any that anyone else has at the trade show.
Tags: business, trade show displays, display stands
An Insider’s Guide to Interviewing Sales People Successfully By: Peter Lawless - Since the dawn of free trading only two things have ever mattered; producing a quality product or service and the ability to sell it successfully. By successfully, I mean ensuring that you achieve maximum profit from the sale, while the customer is delighted with their purchase. In most cases the Business owner understands what they need to produce, but more often that not rely on someone with sales skills to sell it. Would you know a good sales person from a bad one?
Tags: business, marketing, marketing strategy, sales, increase sales, sales training, marketing plan
Finding People in Using People Directory By: mackynote - There are lots of ways that you can do if you are finding a person or people such as past friends and relatives. Before, if you want to find someone, you need to hire a private investigator in order for you to locate and gain information about the person. In hiring private investigator, you need to allocate time in finding one, so to make sure you’ll be working with a professional one. After finding one, you need to wait for a while until the investigator can find information that you want.
Tags: business, public records, people search, background check, criminal record, criminal background check
Europe-Wide Small Business Security Survey Reveals Many Problems By: Jeff Jarred - Enforcing basic levels of security seems to be something small European businesses have mastered, especially those that use the Internet as the main medium to conduct their business. Spyware and viruses are the first terms that come to mind when someone asks for talks about Internet security but the fact of the matter is that there are many more threats that can compromise the valuable data small businesses in Europe rely on. The recent security survey conducted by Symantec Corp.
Tags: business, europe small businesses, small business security, uk small business online security
Do People Search With People Directory Websites By: Gilbert Anderson - These days, all it takes is a few mouse clicks and a few key strokes to get some comprehensive results for a people search. This is all because most people simply prefer going online now and accessing people directory resources to find out some details about any person living in the country. Reasons could differ from one person to another when it comes to using a people directory resource.
Tags: business, criminal records, background check, public records, people search, public background check