How Watch Making Has Changed

By: Mitch Endick

Before wristwatches became ubiquitous in our society, pocket watches were the standard for personal timekeeping. The first pocket watch is thought to have been made in Germany towards the end of the fifteenth century. Bearing a close resemblance to the traditional clock, early pocket watches operated in very much the same manner as their clock cousins.

A deviation from traditional clock designs, pocket watches used the combination of a mainspring, hairspring and a balance wheel. This is in contrast to traditional clock designs that used a swinging pendulum and counter weights.

Like todays wristwatches, pocket watches consist of two main components, the inner works and a metal case. Many different metals were used for early pocket watchcases including gold and silver. The case was usually of a two piece clamshell design. The cases of early watches were impervious to dirt and moisture, which meant the watches, needed a good bit regular cleaning. As time went on, other less expensive metals were used for case works including mild steel and pot metal.

The inner works of the early pocket watch contained a number of gears and wheels held in place between two metal plates. The lower plate or pillar plate rests next to the dial while the upper plate might have come in two pieces though the best made watches utilized a single piece upper plate. The plates were precisely drilled and bored to hold the other components in the proper place. To prevent wear of the moving parts, hard gemstones were used with the moving pegs or axles. There were four wheels in the works known as the barrel wheel, the first wheel, the second wheel and the third wheel. The barrel wheel is used as the attachment for the mainspring.

The motion is transmitted by the uncoiling of the spring and is regulated by the escapement that is kept moving by the combined action of the mainspring and the hairspring providing an oscillating movement. The wheel that has sixty gear teeth around the circumference engages the escapement wheel and transmits motion to the minute hand. It also meshes into the pinion of the center wheel that transmits motion to the hour hand. Movement is controlled by a lever that is connected to the hairspring. By moving the lever to the left or the right, the tension of the hairspring is increased or reduced.

The plates of the works were made from plate stock of steel or brass and would go through a series of machining operations that would include being placed on a pantograph machine which would exactly copy dimensions from a master part to the part being machined. After machining, the plates would be polished using several types of abrasive materials like emery. Gemstones like garnet, rubies, sapphires and diamond. Garnets would be cut with diamond points into tiny disks and would then be set in tiny plates of gold.

The intricate process of assembly the works required precisely made screws and other components that would often be plated or heat treated by hand. The small gears were stamped from brass using very precisely made dies and springs were formed from fine spring wire.

Dial faces were similarly stamped out of a base metal, enameled and the markings stenciled in place and the dial would be fired again. Once fully assembled, the finished watch was subjected to cold temperatures of around forty degrees Fahrenheit and then exposed to higher temperatures up to around one hundred degrees Fahrenheit. This process was undoubtedly used to test the watch in different temperature extremes to ensure consistent operation.

Like countless other consumer products, the way in which modern wrist watches are manufactured has undergone incredible changes since the Industrial Revolution that broke during the turn of twentieth century. This important period in world history ushered in entirely new ways to mass produce products for a growing world population. In every facet of manufacturing there were incredible technological advances that improved efficiencies and helped reduce production costs.

Most of us have heard about the way Henry Ford changed the way automobiles were built by developing the production line assembly method. Cars would constantly roll off the Ford assembly line, as workers would fit various parts to the chassis in a precise order and within a predetermined time. What few of us think about are the other changes that made this type manufacturing operation possible. Critical to the success of the mass production line was the development of standardized parts, components that are nearly identical to each other.

Prior to the development of mass production assembly lines, most mechanical assemblies, including watches were built from components that were made individually most often by different producers. This meant that very often, parts from one machine be it a car, locomotive or sewing machine, could be not be used on another machine.

As other watch producers adopted the practice of parts standardization and integrated quality control, the reliability of wrist watches was greatly increased. The use of standardized components meant that those parts that subject to wear did so in more consistent and predictable way, requiring far less maintenance and repair than those timepieces assembled as one of kind items.

Article Source: http://www.bigfreearticles.com

About the Author:
Mitch Endick is a short article writer for the popular watch and jewelry site: http://www.watchbuyershandbook.com. He provides informative advice on buying watches, watch making and other timepieces. www.watchbuyershandbook.com

Tags: culture and society, watch, watches, custom watches, jewelry, watch making

Please Rate this Article

Comments

Share This Article - Quick and Easy Using This Button:

Add to Onlywire

Click the XML Icon Above to Receive Culture and Society Articles Via RSS!

Read More Articles From - Home | Culture and society

3 Keys to Releasing Self-Doubt By: Dawn McIntyre - 1. Faith: In order to be successful we need to approach with faith. Confidence comes from the latin word 'fidere', which means to have faith in. The next time you are experiencing self-doubt, allow yourself to imaging moving forward with complete faith in yourself, your guides and the universe backing you all the way.
Tags: culture and society, releasing self-doubt, forgiveness, inner beauty, outer beauty, boldly beautiful, beautiful
New Ways for Indians to Find Marriage Revealed By: Billy Baker - Have you been thinking about marriage lately? Are you finding hurdle after hurdle when you attempt to find the right partner for marriage? Are all the Indians you know either married, betrothed or just not right? Does any of this apply to you? A dedicated Indian dating site may be the answer. In this day and age, of increased education, migration, and less rigorous traditions for some, there are real opportunities now for more and more Indian singles to select their own bride or groom.
Tags: culture and society, indian singles, indian single, matrimonial, husband, wife, indian dating site
12 tips how to make good photos By: Lilia Parker - The quality of a photograph in a marriage profile is the most overlooked factor. A good photograph can bring you the desired results while poor photos will make even a beautiful person unpopular. All of us need a stable happy marriage. Therefore, the priority attention should be given to one's profile. Many factors should be considered, and a correct photo is most important. 1. Interiors: Remember, though, that the setting for the photo-shoot is extremely important;
Tags: culture and society, photo, marriage profile, photo website, dating tips, good look, bride photos
Are Indian Dating Sites Any Value? By: Billy Baker - It can often be difficult for single people with an Indian background to find a suitable partner. Indians now live in many countries around the globe in substantial numbers but still find themselves reasonably alone. The issue hasn't just been to find romance and marriage but also religion sometimes makes the matching difficult. This is no longer the case it seems. Until recently, marriages were arranged in India by the families of the bride and groom.
Tags: culture and society, indian dating, dating sites, indian singles, indiandating, singles, love
Discovering How to Rapidly Accelerate Your Spiritual Growth Through Writing Stories By: Chris Cade - You've probably read a spiritual story that was both entertaining and insightful. Maybe it was the classic Christian story, "Footsteps" or perhaps Aesop's fable "The Tortoise and the Hare." When we discover stories that connect with us deeply, we remember them and their lessons our entire lives. The reason people continue to tell, and love, short stories is because stories are entertaining and concise ways to communicate incredibly powerful ideas.
Tags: culture and society, spiritual short stories, chris cade, spirituality
How To Find A Long Lost Loved One Or Friend By: Ed Opperman - Have you lost touch with your best childhood friend? For some of us, we have not seen or heard from them in many years, but remember fondly the good times we shared while growing up. Imagine what it would be like to see them again...the stories you could share...the times forgotten that are brought back to life! It would be like reliving those good times all over again, if only for a moment!
Tags: culture and society, people finder, people search, loacte, skip trace
Understand The Dynamics Of Dating By: Marvin Perry - Dating is a social ritual practiced by two equally interested individuals who want to explore each other's personalities. It involves the various processes of seeking a prospective date, setting the date, and finding a match. Dating, like all human activities that involve the affairs of the heart, also involves risks. People on a date can end up hurting each other through misunderstanding and, ultimately, rejection. So why then do people still want to go on dates? What is the purpose of dating?
Tags: culture and society, worcester dating, worcester singles
Speed Dating For Jewish Singles By: Billy Baker - Did you know that speed dating was originally thought up by Rabbi Yaacov Deyo of Aish Ha Torah? Rabbi Deyo and his students in Los Angeles modified an older Jewish system of introducing and chaperoning Jewish singles. The term "SpeedDating" is a patented trademark owned by Ha Torah. The inaugural speed dating event took place in a cafe in Hollywood in 1998. Today, speed dating has become a world wide phenomena encompassing all races and religions.
Tags: culture and society, speed dating, jewish singles, speeddating, singles, jewish speed dating, single jews
Is Jewish Dating Online Worthwhile? By: Billy Baker - It's true that we all get caught up in our busy world and put off some of the important things such as finding a spouce for one. Don't think that they just turn up by themselves one day like they do in the movies. We both know that most things need to be urged along a little especially if you don't want someone else selecting your spouse for you. Dating sites have become increasingly popular in recent years.
Tags: culture and society, jewish dating, jewish dating services, dating, singles, jewish singles, jewish dating service
Avoiding the Staple with Unique Gifts By: Dustin Schwerman - It's not uncommon for a person to have a fairly staple and stable gift that they like to receive. Birthday or holiday rolls around, and that person can be handled in five minutes. I have plenty of experience with this phenomenon; not only are there a decent few people in my family who fall into this category, but I myself am quite possibly the person most representative of it out of all of us.
Tags: culture and society, unique gift, gifts